EXAMPLE: RSR14TV15-10KA3030 WT-14008-NE-V0
Standard features
Series | Rotor | Model | Packg. | Ohm value | Taper | Tolerance | Life |
---|---|---|---|---|---|---|---|
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
RSR14 | T | V15 | - | -10K | A | 3030 | - |
Extra features
Track | Detents | Snap in | Housing | Rotor | Wiper | Linearity |
---|---|---|---|---|---|---|
9 | 10 | 11 | 12 | 13 | 14 | 15 |
Assembled accessory
Assembly | Ref # | Color | Flammability |
---|---|---|---|
- | 16 | - | - |
WT | -14008 | -NE | -V0 |
Standard configuration: | RSR14 Through-hole | |
---|---|---|
Dimensions: | 14mm | |
Protection: | IP54 (dust-proof). On request: Self-extinguishable, to meet UL. 94 V-0 | |
Substrate: | Carbon technology | |
Color: | Green Housing + white rotor | |
Packaging: | Bulk | |
Wiper position: | at 50% ±15º | |
Terminals: | Straight, without crimping. | |
Marking: | Resistive value marked on housing. Others on request. |
Customized products: A drawing is requested when ordering a customized product. Series, rotor, model and total resistive value are indicated before the code that includes all special specifications. Example: RSR14TV15-10K CODE C00111.
1 Series
RS14 |
2 Rotors
F | N | T | Z | Y | D |
3 Model and Pitch
V15 |
4 Packaging
Packaging | through-hole |
Bulk | (blank)...(1) |
(1) If blank, bulk packaging is implied. |
5 Resistance Value
10K |
The RSR14 has 10K, linear taper and ±30% by default. Other resistive values, tolerances and tapers (log, antilog, cut tracks, constant value areas, etc.) can be studied on request. Please, enclose a drawing when ordering special tapers. |
6 Resistance law / taper
Lin - Linear | A |
- Special tapers have codes assigned: | CODE YXXXXX |
7 Tolerance
±30% |
3030 |
8 Operating Life (Cycles)
Standard: | 100.000 cycles; LV100 |
150.000 cycles: LV150 | |
250.000 cycles: LV250 | |
Long life: LV + number of cycles. i.e: LV300 for 300.000 cycles, LV450, LV1M | LVXX: ex: LV300 |
9 Cut Track - Open circuit.
Open circuit at beginning of track, fully CCW | PCI |
Open circuit at end of track, fully CW | PCF |
10 Detents
Not applicable for RSR14 |
11 Terminals
SNAP IN P | SNP |
Shorter tip of terminal, TPXX, where XX is tip length (under request) | TPXX, ex: TP30 |
Steel Terminals | SH |
12 Housing
Color: For colors other than standard: -See color chart below- | CJ-color, ex., red: CJ-RO |
13 Rotor
Color: For colors other than standard: -See color chart below- | RT-color; ex., blue: RT-AZ |
* Self-extinguishable property, V0, for housing and rotor:By default, carbon is non self-extinguishable, cermet is Self-extinguishable:For carbon: self-extinguishable property can be added. V0 means housingand rotor are V0. If only the housing needs to be V0, then CJ-V0.If only rotor: RT-V0 | CJ-V0, RT-V0(blank)V0 |
14 Wiper
Wiper position (Standard: 50% ± 15º) | (leave blank) |
Initial or CCW | PI |
Final or CW | PF |
Others: following clock positions; at 3 hours: P3H | PXH, ex: P3H |
Wiper torque (Standard: <1.5Ncm) | (leave blank) |
Stronger or softer torque feeling is available on request. |
15 Linearity
Standard Independent linearity 3% | LN3% |
Other Independent linearity below x%, for example, 2%: LN2% | LNx%; ex: LN2% |
Absolute linearity controlled & below x% | LAx% |
16 Potentiometers with assembled accessories
Assembled from terminal side | WT |
Assembled from collector side | WTI |
Accessory ReferenceSee list of shafts and thumbwheels available | -XXXXX Example: 14117 |
Color of shaft or thumbwheelNon self-extinguishable.Self-extinguishable according to standard UL 94(-V0 in box 17 modifies only the accessory, please, note.) | YY Example, white: BA(leave blank) -V0 |
For ordering spare accessories: Accessory reference - color- flammability. Ex. 14117-AZ-V0 is a blue self-extinguishable 14117 thumbwheel | XXXX-YY-V0 |
Color chart for rotor, housing and accessories
Black (1) | White | Neutral | Transp. | Red | Green | Yellow | Blue | Grey | Brown |
---|---|---|---|---|---|---|---|---|---|
NE | BA | IN | TA | RO | VE | AM | AZ | GS | MR |
(1) black is not an option for housing. |