EXAMPLE: RS14TV15-10KA3030 WT-14008-NE-V0
Standard features
| Series | Rotor | Model | Packg. | Ohm value | Taper | Tolerance | Life |
|---|---|---|---|---|---|---|---|
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
| RS14 | T | V15 | - | -10K | A | 3030 | - |
Extra features
| Track | Detents | Snap in | Housing | Rotor | Wiper | Linearity |
|---|---|---|---|---|---|---|
| 9 | 10 | 11 | 12 | 13 | 14 | 15 |
Assembled accessory
| Assembly | Ref # | Color | Flammability |
|---|---|---|---|
| - | 16 | - | - |
| WT | -14008 | -NE | -V0 |
| Standard configuration: | RS14 Through-hole | RS14 SMD |
|---|---|---|
| Dimensions: | 14mm | |
| Protection: | IP54 (dust-proof). On request: Self-extinguishable, to meet UL. 94 V-0 | |
| Substrate: | Carbon technology | Carbon technology, special for high temperature |
| Color: | Green Housing + white rotor | Green housing +grey rotor |
| Packaging: | Bulk | |
| Wiper position: | at 50% ±15º | |
| Terminals: | Straight, without crimping. | |
| Marking: | Resistive value marked on housing. Others on request. | |
Customized products: A drawing is requested when ordering a customized product. Series, rotor, model and total resistive value are indicated before the code that includes all special specifications. Example: RS14TV15-10K CODE C00111.
1 Series
 RS14 |
2 Rotors
| F | N | T | Y | Z |
3 Model and Pitch
| H0 | HC0 | H2,5 | H4 | H5 | HA5 | HL5 | V12,5 | VA12,5 | VL12,5 |
| VR12,5 | V15 | VJ15 | (V15)...CFF | V17,5 | VD7,5 | VD11 | VSMD | VSMD...CY |
| HSMD (Under request, not readily available) |
4 Packaging
| Packaging | through-hole | SMD models |
| Bulk | (blank)...(1) | (blank)...(1) |
| T&R (Tape and 13” reel) | (N.A.)(2) | T&R |
| T&R (Tape and 15” reel) | (N.A.)(2) | T&R15 |
| (1) If blank, bulk packaging is implied. (2) N.A., Not Applicable: Tape and Reel packaging is only available for SMD terminals. | ||
5 Resistance Value
| 10K |
| The RS14 has 10K, linear taper and ±30% by default. Other resistive values, tolerances and tapers (log, antilog, cut tracks, constant value areas, etc.) can be studied on request. Please, enclose a drawing when ordering special tapers. |
6 Resistance law / taper
| Lin - Linear | A |
| - Special tapers have codes assigned: | CODE YXXXXX |
7 Tolerance
| ±30% |
| 3030 |
8 Operating Life (Cycles)
| Standard: | 100.000 cycles; LV100 |
| 150.000 cycles: LV150 | |
| 250.000 cycles: LV250 | |
| Long life: LV + number of cycles. i.e: LV300 for 300.000 cycles, LV450, LV1M | LVXX: ex: LV300 |
9 Cut Track - Open circuit.
| Open circuit at beginning of track, fully CCW | PCI |
| Open circuit at end of track, fully CW | PCF |
10 Detents
| Not applicable for RS14 |
11 Terminals
| SNAP IN P | SNP |
| SNAP IN J | SNJ |
| Shorter tip of terminal, TPXX, where XX is tip length (under request) | TPXX, ex: TP30 |
| Steel Terminals | SH |
12 Housing
| Color: For colors other than standard: -See color chart below- | CJ-color, ex., red: CJ-RO |
13 Rotor
| Color: For colors other than standard: -See color chart below- | RT-color; ex., blue: RT-AZ |
| * Self-extinguishable property, V0, for housing and rotor:By default, carbon is non self-extinguishable, cermet is Self-extinguishable:For carbon: self-extinguishable property can be added. V0 means housingand rotor are V0. If only the housing needs to be V0, then CJ-V0.If only rotor: RT-V0 | CJ-V0, RT-V0(blank)V0 |
14 Wiper
| Wiper position (Standard: 50% ± 15º) | (leave blank) |
| Initial or CCW | PI |
| Final or CW | PF |
| Others: following clock positions; at 3 hours: P3H | PXH, ex: P3H |
| Wiper torque (Standard: <1.5Ncm) | (leave blank) |
| Stronger or softer torque feeling is available on request. |
15 Linearity
| Standard linearity 3% | (leave blank) |
| Independent linearity controlled & below x%, for example, 2%: LN2% | LNx%; ex: LN2% |
| Absolute linearity controlled & below x% | LAx% |
16 Potentiometers with assembled accessories
| Assembled from terminal side | WT |
| Assembled from collector side | WTI |
| Accessory ReferenceSee list of shafts and thumbwheels available | -XXXXX Example: 14117 |
| Color of shaft or thumbwheelNon self-extinguishable.Self-extinguishable according to standard UL 94(-V0 in box 17 modifies only the accessory, please, note.) | YY Example, white: BA(leave blank) -V0 |
| For ordering spare accessories: Accessory reference - color- flammability. Ex. 14117-AZ-V0 is a blue self-extinguishable 14117 thumbwheel | XXXX-YY-V0 |
Color chart for rotor, housing and accessories
| Black (1) | White | Neutral | Transp. | Red | Green | Yellow | Blue | Grey | Brown |
|---|---|---|---|---|---|---|---|---|---|
| NE | BA | IN | TA | RO | VE | AM | AZ | GS | MR |
| (1) black is not an option for housing. | |||||||||
