­

RS9 – How to order

EXAMPLE: RS9MH2,5-10KA2020 SNP PI WT-9005-BA

Standard features

Series
1
Rotor2
Model3
Packg.4
Ohm value5
Taper6
Tolerance7
Life8
RS9
RotorM
ModelH2,5
Packg.-
Ohm value-10K
TaperA
Tolerance2020
Life-
Series Rotor Model Packg. Ohm value Taper Tolerance Life
1 2 3 4 5 6 7 8
RS9 M H2,5 - -10K A 2020 -

Extra features

Track
9
Detents10
Snap in11
Housing12
Rotor13
Wiper14
Linearity15
Snap inSNP
WiperPI
Track Detents Snap in Housing Rotor Wiper Linearity
9 10 11 12 13 14 15
SNP PI

Assembled accessory

Assembly
-
Ref #16
Color-
Flammability-
WT
Ref #-14008
Color-NE
Flammability-V0
Assembly Ref # Color Flammability
- 16 - -
WT -14008 -NE -V0
Standard configuration:
Dimensions:
RS9 Through-hole9mm
Protection:
RS9 Through-holeIP54 (dust-proof). On request: Self-extinguishable, to meet UL. 94 V-0
Substrate:
RS9 Through-holeCarbon technology
RS9 Through-holeCermet
Color:
RS9 Through-holeGreen housing + white rotor
RS9 Through-holeBrown housing +grey rotor
Packaging:
RS9 Through-holeBulk
Wiper position:
RS9 Through-holeat 50% ±15º
Terminals:
RS9 Through-holeStraight, without crimping.
Marking:
RS9 Through-holeResistive value marked on housing. Others on request.
Standard configuration: RS9 Through-hole RS9 Through-hole
Dimensions: 9mm
Protection: IP54 (dust-proof). On request: Self-extinguishable, to meet UL. 94 V-0
Substrate: Carbon technology Cermet
Color: Green housing + white rotor Brown housing +grey rotor
Packaging: Bulk
Wiper position: at 50% ±15º
Terminals: Straight, without crimping.
Marking: Resistive value marked on housing. Others on request.

Customized products: A drawing is requested when ordering a customized product. Series, rotor, model and total resistive value are indicated before the code that includes all special specifications. Example: RS9PH2,5-10K CODE C00111.

1 Series

RS9
RS9

2 Rotors

C
C D E J K M P R Y

3 Model and Pitch

H2,5
H2,5 H3,8 HS3,8 H5 HSMD V7,5 V10 VK10 VR10 MAV10 VSMD VSMD WT-9002 VSMD...CY VSMD...CY WT-9002

4 Packaging

Packaging
Bulk
through-hole(blank)...(1)
SMD models(blank)...(1)
T&R (Tape and 13” reel)
through-holeT&R
SMD modelsT&R
T&R (Tape and 15” reel)
through-holeT&R15
SMD modelsT&R15
(1) If blank, bulk packaging is implied.
Packaging through-hole SMD models
Bulk (blank)...(1) (blank)...(1)
T&R (Tape and 13” reel) T&R T&R
T&R (Tape and 15” reel) T&R15 T&R15
(1) If blank, bulk packaging is implied.

5 Resistance Value

10K
The RS9 has 10K, linear taper and ±30% by default. Other resistive values, tolerances and tapers (log, antilog, cut tracks, constant value areas, etc.) can be studied on request. Please, enclose a drawing when ordering special tapers.
10K
The RS9 has 10K, linear taper and ±30% by default. Other resistive values, tolerances and tapers (log, antilog, cut tracks, constant value areas, etc.) can be studied on request. Please, enclose a drawing when ordering special tapers.

6 Resistance law / taper

Lin - Linear
- Special tapers have codes assigned:
ACODE YXXXXX
Lin - Linear A
- Special tapers have codes assigned: CODE YXXXXX

7 Tolerance

±30%
3030
±30%
3030

8 Operating Life (Cycles)

Standard: between 15.000-50.000 cycles
Long life: LV + number of cycles. i.e: LV200 for 200.000 cycles. (others on request)
ex: LV15; LV50LVXX: ex: LV200
Standard: between 15.000-50.000 cycles ex: LV15; LV50
Long life: LV + number of cycles. i.e: LV200 for 200.000 cycles. (others on request) LVXX: ex: LV200

9 Cut Track - Open circuit.

Open circuit at beginning of track, fully CCW
Open circuit at end of track, fully CW
PCIPCF
Pin in Paste option (Reflow Soldering)
PCIPIP
Open circuit at beginning of track, fully CCW PCI
Open circuit at end of track, fully CW PCF
Pin in Paste option (Reflow Soldering) PIP

10 Detents (DT)

Not applicable for RS9
Not applicable for RS9

11 Terminals

SNAP IN P
SNAP IN J
SNPSNJ
Shorter tip of terminal, TPXX, where XX is tip length (under request)
SNPTPXX, ex: TP25
Steel Terminals
SNPSH
SNAP IN P SNP
SNAP IN J SNJ
Shorter tip of terminal, TPXX, where XX is tip length (under request) TPXX, ex: TP25
Steel Terminals SH

12 Housing

Color: For colors other than standard: -See color chart below-
Color: For colors other than standard: -See color chart below- CJ-color, ex., red: CJ-RO

13 Rotor

Color: For colors other than standard: -See color chart below-
* Self-extinguishable property, V0, for housing and rotor:By default, carbon is non self-extinguishable, cermet is Self-extinguishable:For carbon: self-extinguishable property can be added. V0 means housingand rotor are V0. If only the housing needs to be V0, then CJ-V0.If only rotor: RT-V0
RT-color; ex., blue: RT-AZCJ-V0, RT-V0(blank)V0
Color: For colors other than standard: -See color chart below- RT-color; ex., blue: RT-AZ
* Self-extinguishable property, V0, for housing and rotor:By default, carbon is non self-extinguishable, cermet is Self-extinguishable:For carbon: self-extinguishable property can be added. V0 means housingand rotor are V0. If only the housing needs to be V0, then CJ-V0.If only rotor: RT-V0 CJ-V0, RT-V0(blank)V0

14 Wiper

Wiper position (Standard: 50% ± 15º)
Initial or CCW
(leave blank)PI
Final or CW
(leave blank)PF
Others: following clock positions; at 3 hours: P3H
(leave blank)PXH, ex: P3H
Wiper torque (Standard): <2 Ncm
(leave blank)(leave blank)
Stronger or softer torque feeling is available on request
Wiper position (Standard: 50% ± 15º) (leave blank)
Initial or CCW PI
Final or CW PF
Others: following clock positions; at 3 hours: P3H PXH, ex: P3H
Wiper torque (Standard): <2 Ncm (leave blank)
Stronger or softer torque feeling is available on request

15 Linearity

Standard Independent linearity
Independent linearity below x%, for example, 2%: LN2%
LN3%LNx%; ex: LN2%
Absolute linearity controlled & below x%
LN3%LAx%
Standard Independent linearity LN3%
Independent linearity below x%, for example, 2%: LN2% LNx%; ex: LN2%
Absolute linearity controlled & below x% LAx%

16 Potentiometers with assembled accessories

Assembled from terminal side
Assembled from collector side
WTWTI
Accessory ReferenceSee list of shafts and thumbwheels available
WT-XXXXX Example: 9010
Color of shaft or thumbwheelNon self-extinguishable.Self-extinguishable according to standard UL 94(-V0 in box 17 modifies only the accessory, please, note.)
WT-YY Example, white: BA(leave blank)-V0
For ordering spare accessories: Accessory reference - color- flammability. Ex. 9010-AZ-V0 is a blue self-extinguishable 9010 thumbwheel
WTXXXX-YY-V0
Assembled from terminal side WT
Assembled from collector side WTI
Accessory ReferenceSee list of shafts and thumbwheels available -XXXXX Example: 9010
Color of shaft or thumbwheelNon self-extinguishable.Self-extinguishable according to standard UL 94(-V0 in box 17 modifies only the accessory, please, note.) -YY Example, white: BA(leave blank)-V0
For ordering spare accessories: Accessory reference - color- flammability. Ex. 9010-AZ-V0 is a blue self-extinguishable 9010 thumbwheel XXXX-YY-V0

Color chart for rotor, housing and accessories

Black (1)
NE
WhiteBA
NeutralIN
Transp.TA
RedRO
GreenVE
YellowAM
BlueAZ
GreyGS
BrownMR
(1) black is not an option for housing.
Black (1) White Neutral Transp. Red Green Yellow Blue Grey Brown
NE BA IN TA RO VE AM AZ GS MR
(1) black is not an option for housing.